ELEVATOR MOTOR [03D18] HYDRAULIC SYSTEM 3660 762 Elevating Scraper PC1520 in SCRAPER, ELEVATING 762

№	Number	Qty	Name	Options
1	19H1765	5	Cap Screw	3/8" X 1-3/4"
2	24H1652	9	Washer	13/32" X 11/16" X 7/64"
3	T49482	1	STRAP	BRACKET, LIFTING
4	19H3065	3	Cap Screw	3/8" X 2"
5	[]	1		END, MOTOR ( T49498 USE IF AVAILABLE)
6	T49478	1	SHIM
7	T49479	1	GASKET	END CAP
8	JD9158	1	BEARING CUP
9	JD9604	1	BEARING CONE	BEARING
10	T49480	1	PLATE	VALVE
11	15H558	1	Pipe Plug	HEX. CTSK., 1/8"
12	H63271	1	Pin
13	H63276	1	SNAP RING
14	T49484	1	SWASH PLATE
15	T49483	1	SHAFT	(14 TEETH) MOTOR
16	JD9029	1	Bearing Cone
17	JD7403	1	Bearing Cup	(SUB FOR JD7255)
18	H63245	2	PIN
19	R26906	1	O-Ring
20	R27474	1	Drain Plug
21	19H2993	4	Cap Screw	1/2" X 1-1/2"
21	19H2473	4	Cap Screw	1/2" X 1-3/4"
22	T21228	4	Washer
23	[]	1		(SUB AT56901)
24	T81684	1	O-Ring	(SUB FOR M4125T, THIS APPLICATION) (SUB FOR T54936)
25	[]	1		ROTATING (SUB AT52822 FOR T49481)
26	T81684	1	O-Ring	(SUB FOR U15973, THIS APPLICATION) (SUB FOR T54936)
27	H63243	6	COMPRESSION SPRING
28	25H945	1	GROOVE PIN	1/8" X 3/4"
29	M4237T	1	O-Ring	(IN KIT)
29	T72894	1	O-Ring	(SUB FOR M4237T, THIS APPLICATION)
30	[]	1		(SUB AT52822)
31	H63242	1	SNAP RING
32	F2573R	1	O-Ring
33	T58891	1	PLATE
34	[]	1		(SUB AT52822)
35	AT52822	1	SEAL KIT	(SUB FOR AT48125)
90	[]	1		(SUB AT191262 FOR AT106932, AT44461, AT56048, AT56918, AT57838 AND AT56901) (INCLUDES ALL PARTS ON THIS PAGE LESS O-RING AND ATTACHING HARDWARE AND PAGES LISTED IN FOOT NOTE)