WINCH CONTROL LEVER AND LINKAGE (640 SKIDDER) (640 GRAPPLE SKIDDER WITH 11" DRUM WINCH) (SERIAL NO. -305066) [03B06] CONTROLS LINKAGE 3015 640 Log Skidder and Grapple Log Skidder PC1518 in SKIDDER, LOG 640

№	Number	Qty	Name	Options
1	14H1040	1	Nut	1/2"
2	14H823	1	NUT	1/2"
3	19H3385	1	Cap Screw	1/2" X 1-1/8"
4	24H1111	AR	Washer	17/32" X 1-1/16" X 0.090"
5	T44730	1	BUSHING
6	T13742	1	BUSHING
7	T41655	1	GRIP
8	AT42588	1	LEVER
9	19H2735	1	Cap Screw	1/2" X 2"
10	P46404	2	Pin Fastener
11	T184870	2	YOKE	(SUB FOR T38708)
12	11M7079	2	Cotter Pin	2.500 X 12 MM
13	14H649	2	Nut	1/4"
14	14H785	1	Nut	5/16"
15	R72661	1	Clamp	(SUB FOR R26870)
16	19H1849	1	Cap Screw	5/16" X 1-1/4"
17	T48413	2	BOOT	(USE WITH AT43015)
18	19H2676	2	Cap Screw	3/8" X 1", (640 CABLE SKIDDER)
18	19H3385	2	Cap Screw	1/2" X 1-1/8", (640 GRAPPLE SKIDDER)
19	12H304	2	Lock Washer	3/8"
20	T45156	1	BRACKET	(SUB T63056, (2) R26870, (2) 14H785 AND (2) 19H1813) (640 CABLE SKIDDER)
20	T81955	1	BRACKET	(640 GRAPPLE SKIDDER)
21	T15021	1	STRAP
22	T13988	1	U-BOLT
23	14H850	2	NUT	1/4"
24	AT151408	1	PUSH PULL CABLE	(SUB FOR AT43015 AND AT83372) (SEE DTAC SOLUTION 32276)
25	R27590	1	CLAMP
26	19H2676	2	Cap Screw	3/8" X 1"
27	24H1302	4	Washer	13/32" X 11/16" X 0.035"
28	T53750	1	STOP
29	14H1076	2	Nut	3/8"
30	24H1307	AR	Washer	13/32" X 1" X 1/16"
31	24H1682	1	Washer	13/32" X 7/8" X 0.120", (640 GRAPPLE SKIDDER)
32	14H1076	1	Nut	3/8", (640 GRAPPLE SKIDDER)
33	AH76882	1	Clip	(640 GRAPPLE SKIDDER)
34	28H860	2	Washer	0.423" X 0.675" X 3/8", (640 GRAPPLE SKIDDER)