Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | AW22394 | 1 | Knob | (SUB FOR AW21310 OR AW18284) |
| 2 | H35232 | 1 | Spring | |
| 3 | M82289 | 1 | Spring Pin | 4.775 X 31.750 mm (3/16" X 1-1/4") |
| 4 | W24041 | 2 | Nut | |
| 5 | AW17177 | 1 | Cover | |
| 6 | R26375 | 1 | O-Ring | |
| 7A | W36523 | 1 | Dipstick | (PLASTIC, NOT VENTED) (SUB AW26426 AND AW26640) |
| 7B | AW26426 | 1 | Dipstick | (METAL, VENTED) (USE WITH AW26640) |
| 8 | 19H1905 | 4 | Cap Screw | 5/16" X 1" |
| 9 | 12H303 | 4 | Lock Washer | 5/16" |
| 10 | W28394 | 1 | Support | |
| 11 | W33325 | 1 | Channel | |
| 12 | 34H270 | 1 | Spring Pin | 5/32" X 1-1/2" |
| 13 | W34543 | 1 | Nut | |
| 14 | W23863 | 1 | Gear | 540 RPM (21 TOOTH) |
| 14 | W25357 | 1 | Gear | 1000 RPM (23 TOOTH) |
| 15 | JD9076 | 1 | Bearing Cone | |
| 16 | JD9133 | 1 | Bearing Cup | |
| 17 | JD8988 | 1 | Bearing Cone | |
| 18 | JD8271 | 1 | Bearing Cup | |
| 19 | W22424 | AR | Shim | 0.003", (SUB FOR W22425 OR W22426) |
| 20 | W31255 | 1 | Bearing Housing W/O Bearing | (SUB FOR W22415) |
| 21 | R41041 | 6 | CAP SCREW | |
| 22 | AT33402 | 1 | Seal | (SUB FOR AW12807) |
| 23 | W26136 | 1 | Snap Ring | (NOT USED WITH W27619) |
| 24 | W22841 | 1 | Housing | |
| 25 | JD7418 | 1 | Bearing Cup | (USE WITH W27525) |
| 25 | JD9170 | 1 | Bearing Cup | |
| 26 | JD8969 | 1 | BEARING CONE | (USE WITH W27525) |
| 26 | JD9070 | 1 | Bearing Cone | |
| 27A | W33200 | 1 | Shaft | (ALSO ORDER JD9070 AND JD9170) (SUB FOR W25343) |
| 27B | W34585 | 1 | Shaft | (ALSO ORDER W34543, JD9070, JD9170 AND 34H270) (SUB FOR W27525 OR W32894) |
| 27C | W34585 | 1 | Shaft | |
| 28 | AW25519 | 1 | Seal | (SUB FOR AW12808) |
| 29 | W29648 | 6 | LOCK NUT | |
| 30 | W29649 | 6 | Screw | (FLANGE) |
| 31A | W27619 | 1 | Drive Shaft | (WITHOUT SLIP CLUTCH) |
| 31B | W29939 | 1 | Drive Shaft | (WITH SLIP CLUTCH) |
| 31B | W29939 | 1 | Drive Shaft | (WITH SLIP CLUTCH) |
| 32 | T14646 | 1 | Snap Ring | |
| 33 | W23862 | 1 | Gear | 540 RPM (29 TOOTH) |
| 33 | W25356 | 1 | Gear | 1000 RPM (21 TOOTH) |
| 34 | Q31451 | 1 | Washer | 32.537 X 50.800 X 3.505 mm (1-9/32" X 2" X 0.138") |
| 35 | JD8187 | 1 | Bearing Cone | |
| 36 | JD8225 | 1 | Bearing Cup | |
| 37 | W31257 | 1 | Cap | |
| 38 | AW27472 | 1 | Gear Case | (INPUT SHAFT WITHOUT CLUTCH, OUTPUT SHAFT FOR SPLINED BLADE HOLDER HUB.) (INPUT SHAFT WITH CLUTCH, OUTPUT SHAFT FOR SPLINED BLADE HOLDER HUB.) 540 RPM (SUB FOR AW22336, AW25157 OR AW26658) |
| 38 | AW17932 | 1 | Housing | (INPUT SHAFT WITH CLUTCH, OUTPUT SHAFT FOR KEYED BLADE HOLDER HUB.) 1000 RPM |
| 38 | AW25159 | 1 | Gear Case | (INPUT SHAFT WITHOUT CLUTCH, OUTPUT SHAFT FOR SPLINED BLADE HOLDER HUB.) (INPUT SHAFT WITH CLUTCH, OUTPUT SHAFT FOR SPLINED BLADE HOLDER HUB.) 1000 RPM (SUB FOR AW22337) |
| 38 | AW26659 | 1 | Gear Case | (INPUT SHAFT WITH CLUTCH, OUTPUT SHAFT FOR SPLINED BLADE HOLDER HUB.) 1000 RPM |
| 39 | 19H1833 | 1 | Cap Screw | 5/8" X 1-1/4" |
| 40 | GY2072W | 1 | Washer | |
| 41 | GY2001W | 1 | Shim | 0.005" |
| 41 | GY2180W | 1 | Shim | 0.003" |
| 42 | W31425 | 1 | Pipe Plug | (PLASTIC VENT PLUG) |
| 43A | AW24408 | 1 | Cover | (SUB AW26426 AND AW26640) (SUB FOR AW17178) |
| 43B | AW26640 | 1 | Cover | (USE WITH AW26426) |
| 44 | [] | 1 | USE "FORM-IN-PLACE GASKET", (SUB FOR W22427) |
