AtlasCarParts

HYDRAULIC CYLINDER LIFT BRACKET AND SUPPORTS [A13] 0 Non Sectionalized Catalog 8000 Series Grain Drills and Grain Drill Hitches PC1446 in HITCH, GRAIN DRILL 8350


  1. Home
  2. Agriculture
  3. HITCH, GRAIN DRILL
  4. HITCH, GRAIN DRILL 8350
  5. 8000 Series Grain Drills and Grain Drill Hitches PC1446
  6. 0 Non Sectionalized Catalog
  7. HYDRAULIC CYLINDER LIFT BRACKET AND SUPPORTS [A13]
HYDRAULIC CYLINDER LIFT BRACKET AND SUPPORTS [A13]

Parts list:

 №  Number Qty Name Options
1   N161918   1  SUPPORT R.H.  
2   S2411M   AR  Pin Fastener (SUB FOR S1728M) (ONE USED WITH N162184, TWO USED WITH N161924)  
3   11M7021   AR  Cotter Pin 4 X 25 MM, (USE WITH S1728M)  
3   11M7084   AR  Cotter Pin 5 X 25 MM, (USE WITH S2411M)  
4   N161924   2  STRAP LIFT LINK (2 USED ON ALL DRILLS EXCEPT 8-FOOT (2.44 M) WITHOUT GANG PRESS)  
5   19H3467   6  Screw 5/16" X 1", FULL THREAD (HS, SAE 8)  
6   N10213   6  Lock Nut 5/16"  
7   AN160894   1  Saddle (8100, 8200 AND 8250)  
7   AN160947   1  SADDLE (8300 AND 8350)  
8   N162184   1  STRAP LIFT LINK (FOR 8-FOOT (244M) DRILL WITHOUT GANG PRESS)  
9   03H1851   4  Bolt 1/2" X 1"  
10   12H301   7  Lock Washer 1/2"  
11   14H1040   7  Nut 1/2"  
12   N161919   1  SUPPORT L.H.  
13   19H1930   2  Cap Screw 1/2" X 2-1/2", (WITHOUT GANG PRESS REINFORCEMENT)  
13   19H1820   2  Cap Screw 1/2" X 3", (WITH GANG PRESS REINFORCEMENT)  
14   N214823   1  BRACKET (SUB FOR N161931 OR N168671) HITCH, L.H.  
15   N162191   3  SPACER  
16   N161871   2  PLATE PIVOT (WITHOUT GANG PRESS)  
16   N212058   2  PLATE (SUB FOR N162522) (SUB FOR N169386) PIVOT (WITH GANG PRESS)  
17   N161869   1  Strap CYLINDER LIFT  
18   N162192   1  Sleeve  
19   19H1777   1  Cap Screw 1/2" X 1-3/4"  
20   E40367   1  Pin Fastener (SUB FOR E16987) (THIS APPLICATION ONLY)  
21   N214822   1  BRACKET (SUB FOR N161930 OR N168670) R.H.  
22   E40367   2  Pin Fastener (SUB FOR E16987) (THIS APPLICATION ONLY) (USED ON ALL DRILLS, EXCEPT 8-FOOT (2.44M) WITHOUT GANG PRESS)  
22   N757M   2  PIN FASTENER (USED ON 8-FOOT (2.44M) WITHOUT PRESS GANG)  
23   Q23896   1  Spring Locking Pin SPRING LOCKING  
24   11M7084   1  Cotter Pin 5 X 25 MM  
25   N166026   1  REINFORCEMENT FOR GANG PRESS, (SUB FOR N162634) R.H.  
25   N166027   1  REINFORCEMENT FOR GANG PRESS, (SUB FOR N162635) L.H.  
26   N165171   1  STRAP REINFORCEMENT, INNER  
27   AN162550   1  HITCH GANG PRESS, REINFORCEMENT  
28   19H1815   2  Cap Screw 1/2" X 1-1/4", (FOR CHANNEL TONGUE)  
28   19H3550   2  Cap Screw 1/2" X 4", (HS, SAE 8) (FOR TUBE TONGUE)  
29   E62934   4  Flange Nut 1/2", (SUB FOR N165093)  
30   19H1715   2  Cap Screw 3/4" X 3"  
31   K40016   2  Lock Nut 3/4"  

Next page:

140
MARKER SELECTIVE VALVE ( -1988) [F08]
MARKER SELECTIVE VALVE ( -1988) [F08]
141
MARKER SELECTIVE VALVE BRACKET ( -1988) [F09]
MARKER SELECTIVE VALVE BRACKET ( -1988) [F09]
142
MARKER SEQUENCE VALVE (1989- ) [F10]
MARKER SEQUENCE VALVE (1989- ) [F10]
144
MARKER SELECTIVE VALVE BRACKET (1989- ) [F12]
MARKER SELECTIVE VALVE BRACKET (1989- ) [F12]
146
HARROW TINE BARS AND TINES [F13]
HARROW TINE BARS AND TINES [F13]
138
HYDRAULIC MARKER BEARING AND DISK [F07]
HYDRAULIC MARKER BEARING AND DISK [F07]
137
REAR MOUNTED MARKER BEARING AND DISK [F06]
REAR MOUNTED MARKER BEARING AND DISK [F06]
136
REAR MOUNTED HYDRAULIC MARKER ARM (4-7 FT., 8-11 FT.) [F05]
REAR MOUNTED HYDRAULIC MARKER ARM (4-7 FT., 8-11 FT.) [F05]
134
REAR MOUNTED HYDRAULIC MARKER ARMS (12-15 FT., 16-20 FT.) [F03]
REAR MOUNTED HYDRAULIC MARKER ARMS (12-15 FT., 16-20 FT.) [F03]
132
REAR MOUNTED HYDRAULIC MARKER BASE AND LIFT CHANNEL [F01]
REAR MOUNTED HYDRAULIC MARKER BASE AND LIFT CHANNEL [F01]