SPEED CHANGE GEARS AND SHAFTS [01E15] 35 CLUTCH, TRANSMISSION, AND FINAL DRIVE 450C Crawler Loader PC1443 in LOADER, CRAWLER MASTER TRAX

№	Number	Qty	Name	Options
1	11M7087	1	Cotter Pin	4 X 40 MM
2A	T36149	1	LOCK NUT	1-1/8"
2B	T64254	1	NUT	(SUB FOR T62387)
3	JD8929	1	Bearing Cone
4	JD8251	1	Bearing Cup
5	T13379	1	SNAP RING
6	T20803	AR	SHIM	0.13 MM (.005")
6	T20802	AR	SHIM	0.18 MM (.007")
6	T20804	AR	SHIM	0.25 MM (.010")
7	T20800	1	SPACER
8	T31803	1	GEAR	SECOND SPEED (38 TEETH)
9	T31800	2	SHIFT COLLAR
10	T20794	2	GEAR	SHIFTER (31 TEETH)
11	T31799	3	WASHER
12	T31802	1	GEAR	FOURTH SPEED (26 TEETH)
13	T20797	1	PLATE
14	T31801	1	GEAR	THIRD SPEED (32 TEETH)
15	T31798	1	GEAR	FIRST SPEED (43 TEETH)
16	T14320	AR	Shim	0.05 MM (.002") (ORDER AT146271)
16	T14321	AR	Shim	0.13 MM (.005") (ORDER AT146271)
16	T14322	AR	Shim	0.25 MM (.010") (ORDER AT146271)
17	JD8255	1	Bearing Cup
18	JD8941	1	Bearing Cone
19	T16573	1	Pin
20	17H91	10	RIVET	1/2" X 2"
21	JD9024	1	BEARING CUP
22	JD9025	1	BEARING CONE
23	T31790	1	SHAFT	REAR
24	R43244	1	Needle Roller	(SUB FOR T36816)
25	JD9045	1	BEARING CONE
26	JD9110	1	BEARING CUP
27	T31792	AR	SHIM	0.05 MM (.002")
27	T31793	AR	SHIM	0.13 MM (.005")
27	T31794	AR	SHIM	0.25 MM (.010")
28	T31791	1	SNAP RING
29	T41190	1	HUB	(SUB FOR T31827)
30	AT30888	1	PINION SHAFT	(8 TEETH) WITH GEAR, RING (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB, RING GEAR (MARKED T41190) WITH RIVETS (ALSO INCLUDES 11H240 PIN AND T36149 NUT) (SUB AT59731)
30	AT59731	1	PINION SHAFT	(8 TEETH) WITH RING GEAR (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB (MARKED T41190) WITH RIVETS AND T64254 NUT
..	AT146271	1	SHIM	KIT