BATTERY CABLES AND HOUR METER WIRING HARNESS [02B01] 65 ELECTRICAL SYSTEM 450C Crawler Bulldozer PC1420 in BULLDOZER 450C

№	Number	Qty	Name	Options
1	03H1765	1	Bolt	RD. HD., 3/8" X 3/4"
2	AT18702	1	GROUND CABLE	(USED AS REQUIRED)
3	AT25420	1	BATTERY CABLE	BATTERY CONNECTING 215.9 MM (8-1/2") LONG, LONG (USED WITH TWO BATTERIES)
4	24H1302	2	Washer	13/32" X 11/16" X 0.035"
5	14H812	1	NUT	3/8", (2 USED WITH 2 BATTERIES)
6	AT18715	1	WIRING LEAD	GROUND, HOUR METER
7	14H786	1	Nut	1/4"
8	T41072	2	CLIP
9	19H1948	1	Cap Screw	1/4" X 3/4"
10	T21203	1	TERMINAL	JUNCTION, CONNECTOR
11	AT18705	1	WIRING HARNESS	SAFETY SWITCH AND HOUR METER
12	R44302	5	Tie Band
13	T13814	1	Clamp
14	12H302	1	Lock Washer	1/4"
15	R46415	1	CLAMP	(SUB FOR T20985, THIS APPLICATION)
16	T21101	1	Clamp
17	[]	1		TRANSMISSION TEMPERATURE SENDING UNIT 1 930 MM (76") (MAKE FROM R65593, R65597, T28583, T28585, U46662 AND (2) R65604 FROM AR84006 WIRE LEAD KIT) (SUB FOR AT18984)
18	AT37368	1	SENDER	TRANSMISSION TEMPERATURE
19	T41072	2	CLIP	(HOUR METER LEAD)
20	AT14407	1	SWITCH	STARTER SAFETY
21	AT160120	1	HOUR METER	(SUB FOR AT33995 OR AT61458)
22	[]	1		HOUR METER EXTENSION, 1 930 MM (76") (MAKE FROM R65593, R65597, T28583, T28585, U46662, AND (2) R65604 FROM AR84006 WIRE LEAD KIT) (SUB FOR AT18984)
23	AT29160	2	DRY CHARGED BATTERY	12-VOLT, 570-COLD CRANKING AMPS AT 17.8C (0°F), 180-MINUTE RESERVE CAPACITY AT 25 AMPS
24	T25133	2	CLAMP
25	14H785	2	Nut	5/16"
26	24M7096	2	Washer	0.413" X 0.709" X 0.063"
27	19H2284	2	Cap Screw	3/8" X 7/8"
28	14H812	2	NUT	3/8"
29	12H304	2	Lock Washer	3/8"
30	T31161	1	Stud
31	12H303	2	Lock Washer	5/16"
32	AT158607	1	BATTERY CABLE	2 082.8 MM (82") LONG (WITHOUT DISCONNECT SWITCH) (SUB FOR AT36685, THIS APPLICATION) (SUB FOR AT66922)