RING GEAR [01E16] 35 CLUTCH, TRANSMISSION AND FINAL DRIVE 450C Crawler Bulldozer PC1420 in BULLDOZER 450C

№	Number	Qty	Name	Options
1	T20779	2	Ring
2	17H91	10	RIVET	1/2" X 2"
3	AT12520	2	SEAL	OIL
4	JD7425	1	Bearing Cup
5	JD8103	1	Bearing Cone
6	JD8952	1	Bearing Cone
7	JD8258	1	Bearing Cup
8	AT40263	1	BEARING HOUSING W/O BEARING	WITH BEARING CUP AND OIL SEAL (LEFT) (MARKED T31828)
9	19H3483	12	Cap Screw	3/8" X 1-1/8"
10	12H304	12	Lock Washer	3/8"
11	T37592	AR	Shim	0.05 MM (.002")
11	T37594	AR	Shim	0.25 MM (.010")
11	T37593	AR	Shim	0.13 MM (.005")
12	AT40262	1	BEARING HOUSING W/O BEARING	WITH BEARING CUP AND OIL SEAL (RIGHT) (MARKED T24449)
13	T41190	1	HUB	RING GEAR, (SUB FOR T31827)
14	AT30888	1	PINION SHAFT	(8 TEETH) WITH GEAR, RING (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB, RING GEAR (MARKED T41190) WITH RIVETS (ALSO INCLUDES 11M7087 PIN AND T36149 NUT) (MARKED T31826) (MARKED T41190) (SUB AT5973
14	AT59731	1	PINION SHAFT	(8 TEETH) WITH RING GEAR (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB (MARKED T41190 WITH RIVETS AND, (MARKED T31826) (MARKED T41190) T64254 NUT)