SPEED CHANGE GEARS AND SHAFTS [01E15] 35 CLUTCH, TRANSMISSION AND FINAL DRIVE 450C Crawler Bulldozer PC1420 in BULLDOZER 450C

№	Number	Qty	Name	Options
1	11M7087	1	Cotter Pin	4 X 40 MM
2A	T36149	1	LOCK NUT	OUTPUT, SHAFT-THRUST, 1-1/8"
2B	T64254	1	NUT	OUTPUT SHAFT THRUST, (SUB FOR T62387)
3	JD8929	1	Bearing Cone
4	JD8251	1	Bearing Cup
5	T13379	1	SNAP RING
6	T20803	AR	SHIM	0.13 MM (.005")
6	T20802	AR	SHIM	0.18 MM (.007")
6	T20804	AR	SHIM	0.25 MM (.010")
7	T20800	1	SPACER
8	T31803	1	GEAR	SECOND SPEED (38 TEETH)
9	T31800	2	SHIFT COLLAR
10	T20794	2	GEAR	SHIFTER (31 TEETH)
11	T31799	3	WASHER	THRUST
12	T31802	1	GEAR	FOURTH SPEED (26 TEETH)
13	T20797	1	PLATE	THRUST
14	T31801	1	GEAR	THIRD SPEED (32 TEETH)
15	T31798	1	GEAR	FIRST SPEED (43 TEETH)
16	[]	AR		(A) 0.05 MM (.002") ( T14320 NO LONGER AVAILABLE)
16	[]	AR		(A) 0.13 MM (.005") ( T14321 NO LONGER AVAILABLE)
16	[]	AR		(A) 0.25 MM (.010") ( T14322 NO LONGER AVAILABLE)
17	JD8255	1	Bearing Cup
18	JD8941	1	Bearing Cone
19	T16573	1	Pin
20	17H91	10	RIVET	1/2" X 2"
21	JD9024	1	BEARING CUP
22	JD9025	1	BEARING CONE
23	T31790	1	SHAFT	REAR
24	R43244	1	Needle Roller	(SUB FOR T36816)
25	JD9045	1	BEARING CONE
26	JD9110	1	BEARING CUP
27	T31792	AR	SHIM	0.05 MM (.002")
27	T31793	AR	SHIM	0.13 MM (.005")
27	T31794	AR	SHIM	0.25 MM (.010")
28	T31791	1	SNAP RING	RETAINING
29	T41190	1	HUB	RING GEAR, (SUB FOR T31827)
30	AT30888	1	PINION SHAFT	(8 TEETH) WITH GEAR, RING (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB RING GEAR (MARKED T41190) WITH RIVETS (ALSO INCLUDED 11H240 PIN AND T36149 NUT) (SUB AT59731)
30	AT59731	1	PINION SHAFT	(8 TEETH) WITH RING GEAR (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB (MARKED T41190) WITH RIVETS AND T64254 NUT)