MUFFLER AND MUFFLER EXTENSION (WITH TURBOCHARGER) [01C08] 15 INTAKE AND EXHAUST SYSTEM 450C Crawler Bulldozer PC1420 in BULLDOZER 450C

№	Number	Qty	Name	Options
1	T34462	1	PIPE	(SUB FOR T20844) (DOES NOT FASTEN DIRECTLY TO EXHAUST PIPE- FASTENS TO EXTENSION ON HOOD)
2	AT28928	1	EXHAUST PIPE	WITH FLANGE
3	14H785	2	Nut	5/16", (USE WITH T19978)
4	AT63813	2	HALF CLAMP	(SUB FOR T19978) (FASTENS EXHAUST EXTENSION TO HOOD EXTENSION)
5	12H303	2	Lock Washer	5/16"
6	19H3552	2	Cap Screw	5/16" X 1-1/2"
7	R98844	1	GASKET	(SUB FOR T20141)
8	19H3217	3	Cap Screw	3/8" X 1-3/4"
9	R51736	1	ADAPTER FITTING	(SUB FOR T30200)
10	RE30028	1	TURBOCHARGER	RECONDITIONED, (SUB FOR AT28925, THIS APPLICATION) REMANUFACTURED (SUB FOR AT30057)
10	AR70439	1	TURBOCHARGER	REMANUFACTURED
11	19H3217	4	Cap Screw	3/8" X 1-3/4"
12	AR21841	1	Clamp
13	AT33361	1	HOSE	AIR INLET, WITH ADAPTER
14	AR21999	1	Hose Clamp
15	T21328	1	HOSE
16	R123572	1	Gasket	(SUB FOR T30820 AND R55509) (SUB FOR R89879, THIS APPLICATION)
17	H77698	1	Tie Band	(SUB FOR AT30417 AND T44946)
18	R52819	1	Exhaust Manifold
19	B28851	1	Spacer
20	T112242	1	Bracket	(SUB FOR T34336) CABLE SUPPORT
21	24H1304	8	WASHER	13/32" X 23/32" X 0.120"
22	19H2104	1	Cap Screw	3/8" X 5"
23	19H1925	2	Cap Screw	3/8" X 4-1/4"
24	19H3404	1	Cap Screw	3/8" X 4"
25	12H304	4	Lock Washer	3/8"
26	24H1305	7	Washer	13/32" X 13/16" X 0.065"
27	14H812	7	NUT	3/8"
28	19H2104	2	Cap Screw	3/8" X 5"
29	19H3239	2	Cap Screw	3/8" X 1-1/4"
30	R90658	4	Gasket	(SUB FOR T20006) (ALL T20006 GASKETS MUST BE REPLACED AT THE SAME TIME. DO NOT MIX T20006 AND R90658)
31	R52818	1	ELBOW FITTING
32	24H1309	3	Washer	13/32" X 1-1/16" X 0.120"