Parts list:
№ | Number | Qty | Name | Options |
---|---|---|---|---|
1 | BUC10415 | 1 | Reel Cutting Unit | |
2 | TCU30798 | 2 | Link End | Bedknife Adjuster |
3 | 19M7168 | 2 | Cap Screw | M10 X 30 |
4 | TCU36464 | 2 | Compression Spring | Bedknife Shoe |
5 | TCU35968 | 1 | Shoe | |
6 | AUC13891 | 1 | Frame | |
7 | UC16108 | 2 | Bracket | Front Roller |
8 | 24H1309 | 2 | Washer | 13/32" X 1-1/16" X 0.120" |
9 | UC23562 | 1 | Stationary Knife | Height of Cut = 7.6 mm, Fairway High Cut SUB FOR ET17767 |
9 | UC28163 | 1 | Stationary Knife | Height of Cut = 2.0 mm, Low Cut SUB FOR UC19154 |
9 | TCU36165 | 1 | Stationary Knife | Height of Cut = 2.0 mm, Low Cut Hardened Steel |
9 | UC18873 | 1 | Stationary Knife | Height of Cut = 3.2 mm, STD |
9 | ET11066 | 1 | Stationary Knife | Height of Cut = 3.2 mm, STD Hardened Steel |
9 | UC18869 | 1 | Stationary Knife | Height of Cut = 2.5 mm, STD Tournament |
10 | 19M7402 | 2 | Cap Screw | M10 X 25 |
11 | TCU28635 | 2 | Eccentric | |
12 | 19M7162 | 2 | Cap Screw | M8 X 16 |
13 | 14M7151 | 2 | Nut | M8 |
14 | 21M7194 | 13 | Screw | M6 X 12 |
15 | UC18211 | 1 | Bracket | Mounting Support IF USING FTC/GTC OR UC16109 IF NO FTC/GTC, LH |
16 | UC16109 | 1 | Bracket | Mounting Support IF NO FTC/GTC OR UC18211 IF USING FTC/GTC, RH |
17 | 14M7517 | 6 | Lock Nut | M10 |
18 | AUC13512 | 2 | Adjuster | Height of Cut Rear |
19 | 19M7603 | 4 | Screw | M6 X 20 |
20 | 03M7194 | 2 | Bolt | M10 X 40 |
21 | MT74 | 2 | Bushing | |
22 | UC22218 | 2 | Half Clamp | |
23 | TCU27453 | 2 | Base | Bedknife Adjuster |
24 | TCU25393 | 2 | Leaf Spring | Adjuster |
25 | UC16137 | 2 | Adjuster | Bedknife |
26 | 03M7191 | 4 | Bolt | M10 X 25 |