HAMMER MILL AND FAN [B21] 0 Non Sectionalized Catalog 700 and 750 Grinder-Mixers PC1348 in GRINDER, MIXER 750

№	Number	Qty	Name	Options
1	AN103005	1	SHAFT KEY
2	N105024	1	SHEAVE	(8 GROOVES) (540 ROM) (121.4 MM (4.78") DIA.)
2	N105025	1	SHEAVE	(6 GROOVES) (1000 RPM) (210.8 MM (8.30") DIA.)
3	19H1708	3	CAP SCREW	5/8" X 1-3/4"
4	12H294	3	Lock Washer	5/8"
5	JD9428	1	Eccentric Locking Collar	WITH 22H821 SET SCREW
6	JD7778	1	Lubrication Fitting	30°, 1/8"
7	JD9429	1	Ball Bearing
8	AN103509	1	BEARING	FRONT
9	N108140	1	PLATE
10	N105010	9	PLATE
11	N105572	8	Snap Ring
12	N105106	1	PIN
13	N105979	64	BUSHING	SPACERS, HAMMERS
14	C17199	AR	STRAP	HAMMERS, (64 USED WITHOUT HAY ATTACHMENT) (48 USED WITH HAY ATTACHMENT)
15	N105013	1	WASHER	SPACER, END, REAR
16	N105014	1	NUT	ROTOR SHAFT
17	JD7797	1	Lubrication Fitting	1/4"
18	M16018	1	THREADED NIPPLE
19	JD9430	1	BALL BEARING
20	AN103510	1	BEARING
21	N107485	1	FAN
22	19H1815	4	Cap Screw	1/2" X 1-1/4"
23	12H301	36	Lock Washer	1/2"
24	J19025	1	NUT	19.050 MM (3/4")
25	11H240	1	Cotter Pin	5/32" X 1-1/2"
26	N105011	1	SHAFT
27	N105012	8	BUSHING
28	19H1731	2	Cap Screw	3/8" X 1"
29	12H304	2	Lock Washer	3/8"
30	14H812	2	NUT	3/8"
31	14H794	2	Nut	3/4"
32	N107581	1	EYEBOLT
33	19H1847	1	Cap Screw	5/8" X 2-1/2"
34	AN103488	1	BELT SET	(MATCHED) (1000 RPM) (3-GROOVE)
34	AN103487	1	BELT SET	(MATCHED) (540 RPM) (4-GROOVE)
35	N172130	AR	GRINDER HAMMER	HAMMER, (SUB FOR N108138) (16 USED WITH HAY ATTACHMENT)
36	19H1792	32	Cap Screw	1/2" X 1", (32 USED WITH HAY KNIFE)
37	14H1040	32	Nut	1/2"
38	N112396	1	WASHER	25/32" X 1-5/8" X 0.180"
39	24H1161	1	Washer	13/16" X 1-15/32" X 0.134"