AtlasCarParts

GAUGE WHEEL AND AXLE [A23] 0 Non Sectionalized Catalog 4200 Series Two-Way Integral Moldboard Plows PC1329 in PLOW, MOLDBOARD (TWO-WAY INTEGRAL) 4200


  1. Home
  2. Agriculture
  3. PLOW, MOLDBOARD (TWO-WAY INTEGRAL)
  4. PLOW, MOLDBOARD (TWO-WAY INTEGRAL) 4200
  5. 4200 Series Two-Way Integral Moldboard Plows PC1329
  6. 0 Non Sectionalized Catalog
  7. GAUGE WHEEL AND AXLE [A23]
GAUGE WHEEL AND AXLE [A23]

Parts list:

 №  Number Qty Name Options
1   11H208   1  COTTER PIN 5/16" X 2-1/2"  
2   24H1571   1  Washer 1-25/32" X 2-7/8" X 0.120"  
3   JD7759   2  Lubrication Fitting  
4   AA15647   1  TIE BAR  
5   12H236   2  Lock Washer 3/4"  
6   14H1058   2  Nut 3/4"  
7   A17407   1  SNAP RING  
8   AA15649   1  SLEEVE  
9   11H218   2  Cotter Pin 3/16" X 1-1/2"  
10   A17409   1  LATCH  
11   19H3027   2  Cap Screw 3/4" X 3-1/2", HS, SAE 8  
12   AA15648   1  PIVOT  
13   A11083   1  PIN FASTENER  
14   11H249   1  Cotter Pin 1/4" X 2"  
15   24H1455   1  WASHER 1-1/32" X .105"  
16   A17408   1  EYEBOLT  
17   AA15645   1  AXLE  
18   D10026   1  SEAL  
18   AH20017   1  Seal  
19   JD8194   1  Bearing Cone  
20   B32680   1  BUSHING USE WITH A17277  
20   B30887   1  Spacer USE WITH D10024 AND A50489  
21   JD8230   1  Bearing Cup  
22   N10145   1  Fitting Plug  
23   JD8225   1  Bearing Cup  
24   JD8187   1  Bearing Cone  
25   D10134   1  Washer  
26   14H902   1  Nut 3/4"  
27   D10025   1  Cap  
28   JD16   6  Wheel Bolt  
29   AM30347   1  Tire Valve Stem FOR TUBELESS TIRE  
30   JD680   1  WHEEL 15" FOR 6.70-15 RIB IMPLEMENT TIRE  
31   AB10258   1  HUB (SUB AA22086) (MARKED D10024)  
31   AA22086   1  HUB (SUB AA35473) (MARKED A17277)  
31   AA35473   1  HUB (MARKED D10024)  
31   AA36144   1  HUB (MARKED A50489)  
32   AA23978   1  KIT (CONTAINS AH20017, B32680, JD8187, JD8194, JD8225 AND JD8230)  
33   AA15646   1  SPINDLE  

Next page:

24
ROLLING COULTERS, 455 MM AND 510 MM (18- AND 20-INCH) PLAIN AND RIPPLED CONE BEARING [A25]
ROLLING COULTERS, 455 MM AND 510 MM (18- AND 20-INCH) PLAIN AND RIPPLED CONE BEARING [A25]
25
ROLLING COULTERS, 455 MM AND 510 MM (18- AND 20-INCH) PLAIN, RIPPLED AND NOTCHED ANTI-FRICTION BEARING [B01]
ROLLING COULTERS, 455 MM AND 510 MM (18- AND 20-INCH) PLAIN, RIPPLED AND NOTCHED ANTI-FRICTION BEARING [B01]
26
SMV EMBLEM, REFLECTORS AND BRACKETS [B02]
SMV EMBLEM, REFLECTORS AND BRACKETS [B02]
27
REFLECTOR AND REFLECTOR BRACKET (1985- ) [B03]
REFLECTOR AND REFLECTOR BRACKET (1985- ) [B03]
28
REAR FURROW AXLE AND WHEEL (1973- ) [B04]
REAR FURROW AXLE AND WHEEL (1973- ) [B04]
21
COULTER SHANKS AND CLAMP FOR ALL BOTTOMS EXCEPT FRONT BOTTOMS [A22]
COULTER SHANKS AND CLAMP FOR ALL BOTTOMS EXCEPT FRONT BOTTOMS [A22]
20
COULTER SHANK AND CLAMP FOR FRONT BOTTOMS [A21]
COULTER SHANK AND CLAMP FOR FRONT BOTTOMS [A21]
18
SELECTOR VALVE AND HOSES (1989 - ) [A19]
SELECTOR VALVE AND HOSES (1989 - ) [A19]
16
SELECTOR VALVE AND HOSES ( -1988) [A17]
SELECTOR VALVE AND HOSES ( -1988) [A17]
15
HYDRAULIC CYLINDER 76.2 MM X 139.7 MM (3" BORE X 5-1/2" STROKE) [A16]
HYDRAULIC CYLINDER 76.2 MM X 139.7 MM (3" BORE X 5-1/2" STROKE) [A16]