AUXILIARY WINCH GEARS AND SHAFTS [02J11] 85 WINCH JD740 Skidder PC1297 in SKIDDER, LOG 740

Parts list:

№	Number	Qty	Name	Options
1	11M7087	1	Cotter Pin	4 X 40 MM
2	14H875	1	Nut	7/8"
3	T19411	1	WASHER
4	JD8990	1	BEARING CONE
5	JD7415	1	Bearing Cup
6	M2059T	AR	Shim	(SUB FOR T12388) .05 MM (.002")
6	[]	AR		(A) ( M2057T NO LONGER AVAILABLE) (SUB FOR T12389) .13 MM (.005")
6	[]	AR		(A) ( M2058T NO LONGER AVAILABLE) (SUB FOR T12390) .25 MM (.010")
7	T76238	1	SPACER	(SUB FOR T16392)
8	T16393	2	SPACER
9	T16390	1	GEAR	(42 TEETH)
10	[]	AR		(B) ( M4260T NO LONGER AVAILABLE) .05 MM (.002")
10	[]	AR		(B) ( M4261T NO LONGER AVAILABLE) .13 MM (.005")
10	[]	AR		(B) ( M4262T NO LONGER AVAILABLE) .25 MM (.010")
11	JD8240	1	Bearing Cup
12	JD8907	1	BEARING CONE
13	JD7292	1	Bearing Cup
14	JD7242	1	Bearing Cone
15	26H77	1	Shaft Key	3/16" X 3/4"
16	T18056	2	WASHER
17	JD7939	2	CYLINDRICAL ROLLER BEARING
18	T16373	1	WASHER
19	T17547	1	GEAR	(42 TEETH)
20	16H1592	10	RIVET	7/16" X 1-3/4", (USE WITH AT124357)
20	17H91	10	RIVET	1/2" X 2", (USE WITH AT21052 AND AT33694)
21	AT124357	1	RING GEAR	(47 TEETH) (MARKED T50472) AND OUTPUT SHAFT (8 TEETH) (MARKED T16352) (MATCHED SET) (SUB FOR AT14858, THIS APPLICATION)
22	JD8217	1	Bearing Cup
23	JD8171	1	Bearing Cone
24	[]	1		(25 TEETH) ( T37901 NO LONGER AVAILABLE)
25	T29779	1	PIN FASTENER
26	T19770	1	DRIVE SHAFT	(SUB AT124357)
27	AT124355	1	RING GEAR	MAIN DRIVE SHAFT, (MARKED T50471)
27	AT124357	1	RING GEAR	MAIN DRIVE SHAFT, (MARKED T50473)
28	JD8194	1	Bearing Cone
29	JD8230	1	Bearing Cup
30	AT30408	1	LUBRICANT	1 LB. CAN (NOT ILLUSTRATED)
90	AT40858	1	WINCH	(UNIT MUST BE EQUIPPED WITH 100 CM3 (6.00 CU. IN.) HYDRAULIC PUMP) (NO LONGER AVAILABLE) (CONTAINS ALL PARTS ON THIS PAGE AND PAGES LISTED IN FOOTNOTE ON PAGE TITLED LOG ARCH AND FAIRLEAD (SERIAL NO.