LOG ARCH AND FAIRLEAD (SERIAL NO. -218108) [02G16] 80 HOOD, GRILLE, FENDERS, CANOPY, FRAMES, AND FIRE SUPPRESSION JD740 Skidder PC1297 in SKIDDER, LOG 740

Parts list:

№	Number	Qty	Name	Options
1	19H1346	6	CAP SCREW	5/8" X 1-5/8"
2	[]	1		( AT36250 - NO LONGER AVAILABLE)
3	T38248	AR	Lock Nut	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
4	T37468	AR	NUT	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
5	T37467	AR	WASHER	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
6	AT36255	AR	SEAL	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
7	T37469	AR	BUSHING	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
8	JD8982	AR	Bearing Cone	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
9	JD7418	AR	Bearing Cup	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
10	AT36254	AR	ROLLER	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH) (SUB AT43760)
11	T37464	AR	SHAFT	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
12	BP13616	AR	Snap Ring	(1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH) (SUB FOR T13521)
13	AT37660	AR	ROLLER	(SUB AT43760) (1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
14	T37466	AR	BOLT	(A) (1 USED FOR MAIN WINCH, 2 USED FOR AUXILIARY WINCH)
15	19H1707	8	CAP SCREW	3/4" X 2-3/4"
16	T25922	8	WASHER	(USE IF AVAILABLE)
16	T151797	8	Washer	(SUB FOR T25922 AND T10510 OR T134960)
17	T37460	2	ROLLER	(SUB T47834 SIDE ROLLER, T47829 SIDE ROLLER SHAFT AND (2) JD8656 BALL BEARINGS)
18	T37461	2	SHAFT	(SUB T47829 SIDE ROLLER, T47834 SIDE ROLLER AND (2) JD8656 BALL BEARING)
19	JD9435	4	Ball Bearing
19	JD8656	4	BALL BEARING	(USED WHEN T47829 AND T47834 HAS BEEN INSTALLED AS A REPLACEMENT PART)
20	H26262	4	RING
21	24H1569	4	Washer	1-25/32" X 2-1/4" X 0.036"
22	AT36251	1	BRACKET	LEFT (ILLUSTRATED)
22	AT36252	1	BRACKET	RIGHT
90	AT40858	1	WINCH	(UNIT MUST BE EQUIPPED WITH 98.3 CM3 (6.00 CUBIC-INCH) HYDRAULIC PUMP) (NO LONGER AVAILABLE) (INCLUDES PARTS MARKED (A) ON THIS PAGE AND PAGES LISTED IN FOOTNOTE)