TRANSMISSION OUTPUT SHAFT AND RING GEAR ASSEMBLY [01F08] 35 TRANSMISSION, DIFFERENTIAL, CLUTCH HOUSING AND BELT PULLEY 350B and 350B (Tractor only) Crawler Tractor PC1169 in BULLDOZER 350B

№	Number	Qty	Name	Options
1	T11388	1	HUB
2	JD8932	1	Bearing Cone
3	JD7446	1	Bearing Cup
4	T34354	AR	Shim	(A) .05 MM (.002"), OUTPUT SHAFT
4	T34355	AR	Shim	(A) .13 MM (.005"), OUTPUT SHAFT
4	T34356	AR	Shim	(A) .25 MM (.010"), OUTPUT SHAFT
5	T37064	1	STEERING GEAR	2ND (24 TEETH) (WITH REVERSER AND NO WINCH DRIVE OR PTO) (NOT ILLUSTRATED)
5	T16326	1	GEAR	2ND AND REVERSE (24 AND 33 TEETH) (WITHOUT REVERSER OR WITH REVERSER AND WINCH DRIVE OR PTO)
6	T14210	1	GEAR	1ST AND 4TH (28 TEETH)
7	T20868	1	GEAR	3RD (36 TEETH)
8	JD9117	1	Bearing Cup
9	T10510	1	Washer	(USE IF AVAILABLE)
9	R78019	1	Washer	(SUB FOR T10510)
10	11M7083	1	Cotter Pin	3.200 X 50 MM
11	T34525	1	Nut
12	T34524	1	RETAINER
13	M159T	1	GASKET
14	M160T	1	COVER
15	M359T	3	Washer
16	19H1648	3	Cap Screw	3/8" X 3/4"
17	JD9053	1	Bearing Cone
18	17H91	10	RIVET	1/2" X 2"
19	AT34001	1	STEERING GEAR	SHAFT, OUTPUT (8 TEETH) (MARKED T34358), GEAR, RING (37 TEETH) (MARKED T11365) (MATCHED SET) AND HUB, RING GEAR MARKED T11388) WITH RIVETS