Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | H76283 | 1 | Arm | |
| 1 | H86132 | 1 | Arm | |
| 2 | 19H1907 | 1 | Cap Screw | 5/16" X 2-3/4" |
| 2 | 14H785 | 1 | Nut | 5/16" |
| 3 | 24H1136 | 1 | Washer | 11/32" X 11/16" X 0.065", 11/32" X 11/16" X 0.060" |
| 4 | 28H1511 | 2 | Washer | 0.364" X 0.540" X 1/4" |
| 5 | 28H1517 | 1 | Washer | 0.493" X 0.675" X 1/4" |
| 6 | AH75582 | 1 | Ring | |
| 7 | 19H1849 | 1 | Cap Screw | 5/16" X 1-1/4" |
| 7 | 14H785 | 1 | Nut | 5/16" |
| 8 | 19H1800 | 2 | Cap Screw | 3/8" X 1-1/2" |
| 8 | 14H812 | 2 | NUT | 3/8" |
| 8 | 19H1792 | 3 | Cap Screw | 1/2" X 1" |
| 8 | 14H1040 | 3 | Nut | 1/2" |
| 9 | AH75580 | 1 | Yoke | (SUB H86146, H86147, (2) 14H1040, (2) 19H2926 AND (4) 24H1882) |
| 9 | H86146 | 1 | Yoke | (SUB H97503) |
| 9 | H97503 | 1 | Arm | UPPER HALF |
| 10 | P43363 | 1 | Snap Ring | |
| 11 | AH75576 | 1 | Thrust Bearing | (SUB AH87207) |
| 11 | AH87207 | 1 | Thrust Bearing | |
| 12 | JD7798 | 1 | Lubrication Fitting | NLA |
| 13 | 34H372 | 1 | Spring Pin | 1/2" X 2-1/4", (SUB N137598, THIS APPLICATION) |
| 13 | N137598 | 1 | Spring Pin | |
| 14 | AH173724 | 1 | Pulley | CLEANING FAN DRIVE (OUTER), (SUB FOR AH87208 OR AH100016), (MARKED H100792) |
| 15 | A4730R | 1 | O-Ring | |
| 16 | H80390 | 1 | Half Sheave | CLEANING FAN DRIVE (INNER) 213 MM (8-3/8") DIA. |
| 17 | H80389 | 1 | Chain Sprocket | (SUB AH84243) |
| 17 | AH84243 | 1 | Chain Sprocket | (SHOE AND STRAW WALKER DRIVE) |
| 17 | AH87249 | 1 | Chain Sprocket | Z=15, (SHOE AND STRAW WALKER DRIVE) |
| 18 | 22H853 | 6 | Set Screw | 3/8" X 7/8" |
| 19 | 14H732 | 8 | Nut | 3/8" |
| 20 | 22H775 | 1 | Set Screw | 5/16" X 1/4", 5/16" X 1/4" |
| 21 | JD8551 | 2 | Eccentric Locking Collar | |
| 22 | E10018 | 4 | Pressed Flanged Housing | |
| 23 | JD9246 | 2 | Ball Bearing | |
| 24 | 19H1731 | 6 | Cap Screw | 3/8" X 1" |
| 24 | 14H812 | 6 | NUT | 3/8" |
| 25 | 22H836 | 2 | Set Screw | 3/8" X 1" |
| 26 | AH75985 | 1 | Pulley | 245 MM (9-5/8") DIA., (CLEAN GRAIN ELEVATOR DRIVE) |
| 27 | 19H2127 | 4 | Cap Screw | 5/16" X 7/8" |
| 28 | AH83227 | 1 | Pulley | (SUB AH92104) |
| 28 | AH92104 | 1 | Pulley | 508 MM (20") DIA. |
| 29 | H77020 | 1 | Pulley | 162 MM AND 211 MM (6-3/8" AND 8-19/64") DIAS., (TAILINGS AUGER AND SHOE GRAIN SUPPLY AUGERS DRIVE) |
| 30 | [] | 1 | 6 MM X 6 MM X 127 MM (1/4" X 1/4" X 5"), (CUT FROM H64374 IN AH64587 KEY STOCK KIT) | |
| 31 | H76277 | 1 | Jackshaft | |
| 32 | H76282 | 1 | Pin Fastener | |
| 33 | [] | 1 | 6 MM X 6 MM X 31 MM (1/4" X 1/4" X 1-1/2"), (CUT FROM H64374 IN AH64587 KEY STOCK KIT) | |
| 34 | AH75581 | 1 | Yoke | (SUB H86147, H86146, (2) 14H1040, (2) 19H2926 AND (4) 24H1882) |
| 34 | H86147 | 1 | Yoke | LOWER HALF |
| 35 | 14H1008 | 2 | Nut | 3/8" |
| 36 | N13224 | 1 | Shaft Key | |
| 37 | 24H1682 | 1 | Washer | 13/32" X 7/8" X 0.120" |
| 38 | AH75577 | 1 | Bolt | |
| 39 | 24H1882 | 4 | Washer | 17/32" X 3/4" X 0.060" |
| 40 | 19H2926 | 2 | Screw | 1/2" X 1" |
| 40 | 14H1040 | 2 | Nut | 1/2" |
