Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | H114617 | 1 | Shaft | (USE WITH H114618 AND H84102) (SUB FOR H77383) |
| 2 | H84102 | 1 | Shaft Key | (SUB FOR H76603) |
| 3A | H84102 | 1 | Shaft Key | (SUB H76604) |
| 3B | H84102 | 1 | Shaft Key | |
| 3B | H114628 | 1 | Key | |
| 4 | 14H732 | 4 | Nut | 3/8" |
| 5 | 22H837 | 1 | SET SCREW | 3/8" X 5/8" |
| 6 | H78945 | 1 | Pulley | |
| 6 | H83145 | 1 | Pulley | |
| 6 | H84103 | 1 | Pulley | |
| 7 | 19H1781 | 2 | CAP SCREW | 1/2" X 3-1/2", (USE WITH 14H1040 AND 12H301) |
| 8 | JD7806 | AR | Lubrication Fitting | |
| 9 | H87455 | 1 | Bearing Housing W/O Bearing | (SUB FOR H77381 OR H82385) |
| 10 | JD9339 | 2 | Ball Bearing | (ALSO ORDER H87455) |
| 11 | 22H979 | 2 | Set Screw | 3/8" X 3/8" |
| 12 | JD8579 | 2 | Eccentric Locking Collar | |
| 13 | JD7797 | 1 | Lubrication Fitting | |
| 14 | P43026 | 1 | Snap Ring | |
| 15 | 24H1275 | 1 | Washer | 1-1/64" X 1-1/2" X 0.075" |
| 16 | H93557 | 1 | Support | (SUB FOR H77388) |
| 17 | AH76191 | 1 | Pivot | |
| 18 | 03H1480 | 2 | Bolt | 3/8" X 1-1/4", (USE WITH 14H812) |
| 19 | 24H1577 | AR | Washer | 1-25/32" X 2-7/8" X 0.036", (ELECTROMAGNETIC CLUTCH) |
| 20 | AH76193 | 2 | Seal | (ELECTROMAGNETIC CLUTCH) |
| 21 | H77380 | 2 | Bushing | (ELECTROMAGNETIC CLUTCH) |
| 21 | H96996 | 2 | Bushing | (ELECTROMAGNETIC CLUTCH) |
| 22 | AH76192 | 1 | Pulley | (ELECTROMAGNETIC CLUTCH) (MARKED H77391) |
| 22 | AH96107 | 1 | Pulley | 229 MM (9") DIA., (ELECTROMAGNETIC CLUTCH) (MARKED H97311) |
| 22 | H77392 | 1 | Pulley | 229 MM (9") DIA., (WITHOUT ELECTROMAGNETIC CLUTCH) |
| 23 | 24H1571 | 1 | Washer | 1-25/32" X 2-7/8" X 0.120" |
| 24 | H77390 | 1 | Pulley | |
| 24 | H96848 | 1 | Pulley | 402 MM (15-53/64") DIA. |
| 25 | 19H1974 | 2 | Cap Screw | 1/2" X 2-3/4", (USE WITH 12H301), (WITHOUT ELECTROMAGNETIC CLUTCH) |
| 26 | 24H1218 | 1 | Washer | 1-9/32" X 3" X 0.120" |
| 27 | H82620 | 1 | Lock Nut | |
| 28 | 19H1974 | 2 | Cap Screw | 1/2" X 2-3/4", (USE WITH 12H301 AND 14H1040) |
| 29 | 22H888 | 2 | Set Screw | 3/8" X 1-1/4", (SLOW SPEED CYLINDER DRIVE INTERMEDIATE SHAFT) |
| 30 | H85441 | 1 | Chain Sprocket | 21 TEETH, (SLOW SPEED CYLINDER DRIVE INTERMEDIATE SHAFT) |
| 30 | H85442 | 1 | Chain Sprocket | 25 TEETH, (SLOW SPEED CYLINDER DRIVE INTERMEDIATE SHAFT) |
| 31 | JD7788 | 1 | Lubrication Fitting | 45°, 1/4" |
