ELEVATOR DRIVE HOUSING AND FIRST PLANETARY GEARS (SERIAL NO. -001000) [02F01] 75 OSCILLATING HITCH AND SCRAPER 860 and 860A Elevating Scrapers PC1124 in SCRAPER, ELEVATING 860A

№	Number	Qty	Name	Options
1	U44350	1	BUSHING
2	U44365	6	DOWEL PIN
3	12H302	6	Lock Washer	1/4"
3	12H304	6	Lock Washer	3/8"
4	U44323	1	GASKET
5	15H558	6	Pipe Plug	HEX. CTSK., 1/8"
5	N52528	6	Bushing	(SUB FOR T17997)
6	U44351	6	COWL
6	T38809	6	OIL PAN
7	19H1791	6	Cap Screw	1/4" X 1-1/4"
7	AR63865	3	Cylinder	(INCLUDES (2) R41920 CAP SCREWS AND (2) R42729 WASHERS) (SUB FOR R40808, THIS APPLICATION)
8	U44324	2	THRUST WASHER
9	T36514	1	RETAINER
10	U44354	1	GEAR	SUN (16 AND 23 TEETH)
11	U44355	2	SNAP RING
12	U44356	1	PLANET PINION CARRIER
13	T40431	3	PINION SHAFT	(SUB FOR U44357)
14	H871R	3	Ball	STEEL
15	R66197	6	Thrust Washer	(SUB FOR R43216)
16	U44359	120	Dowel Pin
17	T37223	3	WASHER	(SUB FOR R43218, THIS APPLICATION)
18	U44360	3	PINION	PLANET (16 AND 45 TEETH)
19	19H1813	3	CAP SCREW	5/16" X 5/8"
19	12H303	3	Lock Washer	5/16"
20	T35724	3	SCREW
21	U44352	4	DOWEL PIN
22	U17027	2	Fitting	MAGNETIC PIPE (USE WITH GEAR HOUSINGS, MARKED U44349 OR T38810)
22	U46707	2	FITTING	MAGNETIC (USE WITH GEAR HOUSING, MARKED T57016)
23	U44358	1	WASHER
24	T57017	1	SHAFT	MAIN (14 AND 15 TEETH) (SUB FOR U44353)
25	T41643	1	BUSHING	(SUB FOR U44347 AND T38329)
26	[]	1		(SUB JD7672)
27	JD7672	1	BALL BEARING	INCLUDES SNAP RING
28	[]	1		BEARING ( U44345 USE IF AVAILABLE)
29	A4827R	2	Washer	(USE WITH U46707 PLUG)
30	AT35409	1	HOUSING	(SUB AT54990)
30	AT54990	1	HOUSING	(MARKED T57016) (SUB FOR AT37653) (MARKED T38810)
90	AT35405	1	TRANSMISSION CASE	(SUB AT54984) (INCLUDES ALL PARTS ON THIS PAGE AND PAGES LISTED IN FOOTNOTE ON PAGE 75-9, ELEVATOR DRIVE MOTOR SUPPORT AND SECOND PLANETARY (SERIAL NO. -002010))