MOLDBOARDS AND CUTTINGS EDGES (17 INCH CURVATURE) [02G20] 80 ENGINE AND MAIN FRAME, SADDLE, CIRCLE DRIVE, CAB, SEAT, AND HOOD 570, 570A (Automatic Blade Control System) Motor Graders PC1058 in GRADER, MOTOR 570

Parts list:

№	Number	Qty	Name	Options
1	T152767	2	End Bit
2	T66702	2	Dura-Max Cutting Edge	DURA-MAX THROUGH HARDENED DOUBLE BEVEL EDGE, 1 829 MM LONG (5/8" X 6" X 6') (USED WITH 3 658 MM (12') MOLDBOARD) (SUB FOR U42494) (DO NOT USE WITH U42494)
2	U46287	2	CUTTING EDGE	NON-HARDENED CARBON STEEL DOUBLE BEVEL EDGE, 1 524 MM LONG (5/8" X 6" X 5') (USED WITH 3 048 MM (10') MOLDBOARD)
2	T71978	2	Dura-Max Cutting Edge	DURA-MAX THROUGH HARDENED DOUBLE BEVEL EDGE, 1 829 MM LONG (5/8" X 8" X 6') (USED WITH 3 658 MM (12') MOLDBOARD)
2	T48840	2	Cutting Edge	SELECTIVE HARDENED SINGLE BEVEL EDGE, 1 829 MM LONG (3/4" X 6" X 6') (USED WITH 3 658 MM (12') MOLDBOARD)
3	09H1759	AR	Bolt	HS, SAE 8, 5/8" X 2-1/4" (26 USED WITH 15.9 MM (5/8") MATERIAL X 3 658 MM (12') LONG REGULAR MOLDBOARD, 22 USED WITH 15.9 MM (5/8") MATERIAL X 3 048 MM (10') LONG REGULAR MOLDBOARD, 24 USED
4	19H2716	12	Cap Screw	3/4" X 1-1/2"
4	19H1768	12	Cap Screw	3/4" X 2"
5A	U42489	1	RETAINER	(SUB T43503 AND (3) 19H2717)
5B	T43503	4	Retainer
6	U42490	AR	SHIM	.25 MM (.010")
7	U42491	AR	STRAP	1.27 MM (.050")
8	AT40492	1	MOLDBOARD	(SUB FOR AU43724)
9	12H294	AR	Lock Washer	5/8"
10	14H1039	AR	Nut	5/8"
11	[]	1		( U42493 NO LONGER AVAILABLE) (SUB T149334 AND 40M7109)
11	T149334	1	DOWEL PIN
12	U42492	1	BRACKET
13	34H320	1	Spring Pin	1/4" X 2-1/4"
14	AU41602	1	PIVOT	(SUB AT35427 AND T36491)
14	AT35427	1	PIVOT
15	19H1768	2	Cap Screw	3/4" X 2"
16	U42501	2	SPACER
17	19H1835	4	Cap Screw	3/4" X 1-1/2"
18	12H236	6	Lock Washer	3/4"
19	B3627R	12	WASHER
20	U42502	1	PIN FASTENER
21	19H1904	1	Cap Screw	5/16" X 3"
22	12H303	1	Lock Washer	5/16"
23	14H785	1	Nut	5/16"
24	12H236	12	Lock Washer	3/4"
25	24H1401	2	WASHER	25/32" X 1-3/4" X 0.194"
26	40M7109	2	Snap Ring	(USE WITH T149334)