HEATER AND HOSES [02I08] 80 ENGINE AND MAIN FRAME, SADDLE, CIRCLE DRIVE, CAB, SEAT, AND HOOD 570, 570A (Automatic Blade Control System) Motor Graders PC1058 in GRADER, MOTOR 570

№	Number	Qty	Name	Options
1	15H576	1	Pipe Bushing	(A) 3/8"
2	15H622	1	Elbow Fitting	(A) 3/8" X 90°
3	AT169553	1	DRAIN VALVE	(A) (SUB FOR AH12614)
4	AR21837	4	Clamp	(A) (SUB FOR AR21837, THIS APPLICATION)
5	H77698	3	Tie Band	(SUB FOR AT30417 AND T44946)
6	U43303	1	CLAMP	(A)
7	12H304	1	Lock Washer	3/8"
8	19H1648	1	Cap Screw	3/8" X 3/4"
9	U16949	2	Grommet	(A)
10	R41985	2	Fitting	(SUB FOR H23196, THIS APPLICATION)
11	15H627	2	Elbow Fitting	45° X 1/2"
12	AA4927R	1	BULB	(A) 12-VOLT
13	AU42189	1	SWITCH	(A)
14	AU42169	1	HEATER	(SUB AT140290)
14	AT140290	1	HEATER	(A) (SUB FOR AT27086 OR AT114647)
15	AU42312	1	BRACKET	(A) R.H.
16	12H302	4	Lock Washer	(A) 1/4"
17	19H1919	4	Cap Screw	(A) 1/4" X 5/8"
18	14H812	4	NUT	(A) 3/8"
19	12H304	4	Lock Washer	(A) 3/8"
20	19H2676	4	Cap Screw	(A) 3/8" X 1"
21	U16163	1	ELBOW FITTING
22	AU42313	1	BRACKET	(A) L.H.
23	[]	1		(A) 3.1M (5/8" X 10-1/3") REQUIRED (MAKE FROM T60811, 15M (50') BULK) (SUB FOR U43310, THIS APPLICATION)
24	U43311	1	HOSE	3.65M (5/8" X 12") REQUIRED (MAKE FROM T60811 , 15M (50') BULK) (SUB FOR U43311, THIS APPLICATION)
24	[]	1		(A) 3.9M (5/8" X 13") REQUIRED (MAKE FROM T60811, 15M (50') BULK) (SUB FOR T37742, THIS APPLICATION)
25	R41985	1	Fitting	(SUB FOR H23196, THIS APPLICATION)
26	T38970	1	SPRING
..	BU40440	1	HEATER	(INCLUDES ALL PART NUMBERS IDENTIFIED BY (A) ON THIS PAGE AND ALSO AT36376, AT41987 AND (2) R44302)