SPEED AND DIRECTION LEVERS [01H13] 40 TRANSMISSION, TRANSFER DRIVE AND DIFFERENTIAL 570, 570A (Automatic Blade Control System) Motor Graders PC1058 in GRADER, MOTOR 570

№	Number	Qty	Name	Options
1	M80373	1	Yoke	(SUB FOR L324T)
2	C1067R	2	PIN FASTENER	(USE IF AVAILABLE)
2	R65563	2	Pin Fastener	(SUB FOR C1067R)
3	11M7059	3	Cotter Pin	3.200 X 20 MM
4	H93809	2	Knob	(SUB FOR U42316, THIS APPLICATION)
5	14H849	2	Nut	7/16"
6	AU41623	1	LEVER
7	F3322R	1	SPRING
8	11M7077	1	Cotter Pin	1.600 X 25 MM, (USE WITH U43940)
8	11M7079	1	Cotter Pin	2.500 X 12 MM, (USE WITH T48111)
9	T48111	1	Pin Fastener	(SUB FOR U43940)
10	A11318	2	Snap Ring
11	24H1364	4	Washer	21/32" X 15/16" X 0.036"
12	M3742T	2	Yoke
13	14H860	4	Nut	1/4"
14	11M7081	3	Cotter Pin	2.500 X 20 MM
15	R662R	2	PIN FASTENER
16	U12857	2	BUSHING
17	AU41628	1	LEVER
18	U42561	1	LEVER
19	AU42279	1	LEVER	(SUB FOR AU41625)
20	24H1106	1	Washer	11/16" X 1-3/4" X 0.134"
21	U43466	1	YOKE	(SUB FOR U42546)
22	14H774	1	Nut	3/8"
23	U43314	1	STUD	(SUB FOR U42547)
24	AU41635	1	PUSH PULL CABLE	(SPEED AND DIRECTION CONTROL)
24	AT74868	1	PUSH PULL CABLE	(DIRECTION CONTROL)
25	T151568	2	YOKE	(SUB FOR AU41621 OR R50865) (SUB FOR U44754, THIS APPLICATION
26	L1526N	2	Pin Fastener	(SUB FOR U42540)
27	11H206	2	Cotter Pin	3/32" X 3/4"
28	34H262	1	Spring Pin	5/32" X 3/4"
29	U43465	1	LEVER	(SUB FOR AU41641)
30	19H2633	2	Cap Screw	3/8" X 1-1/2"
31	T33483	4	CLAMP	(SUB FOR T19036)
31	T33483	4	CLAMP
32	19H2472	2	Cap Screw	1/2" X 1"
32	12H301	2	Lock Washer	1/2"
33	[]	1		( AU41321 USE IF AVAILABLE)
34	12H304	2	Lock Washer	3/8"
35	14H849	1	Nut	7/16"
36	[]	1		( N1753DN NO LONGER AVAILABLE)
37	14H785	2	Nut	5/16"
38	12H303	2	Lock Washer	5/16"
39	R51284	2	STUD
40	AU41635	1	PUSH PULL CABLE	(SPEED CONTROL)
40	AT74867	1	PUSH PULL CABLE