UPPER HALF TRANSFER DRIVE (SERIAL NO. -003133) [01I06] 40 TRANSMISSION, TRANSFER DRIVE AND DIFFERENTIAL 570, 570A (Automatic Blade Control System) Motor Graders PC1058 in GRADER, MOTOR 570

№	Number	Qty	Name	Options
1	19H3544	1	Cap Screw	HS, SAE 8, 1/2" X 4-1/2"
2	U42013	1	WASHER
3	U42014	1	CAP
4	15H585	1	Pipe Plug	3/4" SQ. HD.,
5	AU41311	1	SHAFT
6	U41850	1	BOX	(SUB AT44089 DROP BOX HOUSING, (2) R26448 O-RINGS AND (2) T20168 WASHERS)
7	U42011	2	Dowel Pin
8	JD7418	2	Bearing Cup
9	JD8969	2	BEARING CONE
10	15H558	1	Pipe Plug	1/8" HEX. CTSK.,
11	AU41307	1	GEAR	INPUT, (MARKED U42006)
12	AT58390	1	SEAL	(SUB FOR AT12566, THIS APPLICATION)
13	U42016	1	O-Ring
14	U42017	AR	SHIM	.13 MM (.005")
15	U42621	AR	SHIM	.08 MM (.003")
16	U42622	AR	SHIM	.25 MM (.010")
17	AU41308	1	BEARING WITH HOUSING	UPPER, (MARKED U41851)
18	R46567	6	Screw	(SUB FOR R63300, THIS APPLICATION)
19	U42855	1	SHAFT
20	R35075	2	QUICK LOCK PIN
21	U41893	1	CRADLE	CLUTCH THROW-OUT BEARING
22	U41839	1	FORK	CLUTCH
23	34H253	1	SPRING PIN	1/8" X 1-3/8", (SUB FOR 5218SC, THIS APPLICATION)
24	AM3983T	1	THRUST BEARING
25	11M7032	1	Cotter Pin	5 X 50 MM
26	P50631	1	O-Ring
27	U42012	1	SHAFT
28	JD8182	2	Bearing Cone
29	JD8228	2	Bearing Cup
30	U42675	2	Snap Ring
31	U42003	1	SPACER
32	U42004	AR	Shim	.102 MM (.004")
33	AU41305	1	GEAR	UPPER, (MARKED U42002)
34	19H2633	10	Cap Screw	3/8" X 1-1/2"
35	12H304	10	Lock Washer	3/8"
36	19H2735	6	Cap Screw	1/2" X 2"
37	12H301	6	Lock Washer	1/2"
38	19H2725	4	Cap Screw	3/4" X 3-3/4"
39	12H236	4	Lock Washer	3/4"
40	14H858	4	NUT	3/4"
41	M3470T	1	Plug	(WITHOUT CLUTCH DISCONNECT)