CYLINDER BLOCK (GRADER SERIAL NO. 001700-002160) (329 CUBIC INCH (5392 CM3) ENGINE) (ENGINE SERIAL NO. 200851-298020) (MANUFACTURED 1971-1972) [01B06] 10 ENGINE 570, 570A (Automatic Blade Control System) Motor Graders PC1058 in GRADER, MOTOR 570

№	Number	Qty	Name	Options
1	R48685	2	Dowel Pin	(SUB FOR A120R)
2	15H690	AR	Pipe Plug	3/4"
2	15H562	AR	Pipe Plug	1"
3	R48685	2	Dowel Pin	(SUB FOR R26241, THIS APPLICATION)
4	AT13740	1	Drain Valve
5	15H275	1	Pipe Plug	1/4", (WITHOUT ENGINE COOLANT HEATER)
5	15H613	1	ELBOW FITTING	90° (WITH ENGINE COOLANT HEATER)
6	T20173	2	STUD
7	R131794	1	Gasket	(SUB FOR R90648)
8	AT21191	5	SET SCREW
8	AT22919	2	SET SCREW
9	24H1304	2	WASHER	13/32" X 23/32" X 0.120"
10	14H1076	2	Nut	3/8"
11	T20166	5	SCREW
12	12H324	5	WASHER	3/8"
13	RE16149	1	PLATE	(SUB FOR T20295 AND R56736) (ALSO ORDER (8) AT21191 SET SCREWS AND (2) AT22919 SET SCREWS)
14	T18891	2	Plug
15	R26493	1	Bushing	OIL PRESSURE RELIEF VALVE
16	R26650	2	Dowel Pin
17	15H623	1	Pipe Plug	3/8" SQ. HD.,
18	19H1849	2	Cap Screw	5/16" X 1-1/4"
19	T27860	2	Washer	ALUMINUM, (SUB FOR R20498, THIS APPLICATION)
20	R520618	1	Gasket	(SUB FOR R97350, R27285) FUEL PUMP
21	RE50688	1	CYLINDER BLOCK	(MARKED R113670) (SUB FOR AT31597, MARKED T32345, AR59060, MARKED R53260 AND RE97027, MARKED R72968) (SUB FOR RE19872) (MARKED R80405) (ALSO ORDER (3) R53219, (23) R53223, R111135 AND R111137) (SUB RE
22	R73139	1	Flow Control Hyd. Valve	(USE WITH BLOCK MARKED R72968)
23	R46625	1	SPRING	(USE WITH BLOCK MARKED R72968)
..	AR97040	1	SHORT BLOCK ASSEMBLY	(SUB FOR AT31517, AR59077, RE19873 AND AR97037) (SUB RE56353) (ALSO ORDER RE501581, (3) R53219, (23) R53223, AR67942 AND RE44574)